Warning: call_user_func_array() expects parameter 1 to be a valid callback, no array or string given in /home/izo22auzu03q/public_html/wp-includes/class-wp-hook.php on line 326
class="entry-single entry-single-product post-370361 product type-product status-publish has-post-thumbnail product_cat-power-amplifier product_tag-power-amplifier entry clearfix first instock shipping-taxable product-type-simple">

Ram Audio W 6000

High End High-Power Amplifiers

Utilizing state-of-the-art technology RAM Audio introduces the W Series 2 and 4-channel high end power amplifiers with output ratings up to 12 kW . Dual PFC QuantaPulse switched-mode power supplies provide increased, smooth output irrespective of mains fluctuations. Housed in 46 cm deep, 2U rackmountable reinforced steel chassis the 7 high-power models are easily portable weighing in at 10 – 12 kg only.

The W Series features Neutrik XLR and Speakon connectors, a large blue LCD user interface and 13-detent digital encoders for convenient gain, bridge mode, input link and ICL setting. A DSP loudspeaker management system is optionally available.

Main Features

  • high-efficiency power amplifiers with up to 12 kW RMS output power
  • regulated PFC QuantaPulse dual switch-mode power supply
  • digital control with large blue LCD interface
  • temperature and output level indication
  • USB port for firmware updates and DSP control
  • gain, bridge mode, input links and ICL configurable via 13-detent digital encoders on the front panel
  • RAM Audio power management system (PMS)
  • high-efficiency oversized output transistors for maximum reliability under extreme operating conditions
  • easily removable front panel for dust filter cleaning, Neutrik XLR and Speakon connectors

PMS™: a complete Power Management System that monitors the essential parameters for safe operation. It precisely controls the power supply to the amplifier and output power under extreme and dangerous conditions:

  • if the internal operating temperature approaches emergency shutdown during irregular operating conditions,
  • if the power supply draws excessive current under laboratory conditions or during extended acoustic feedback.

ICL™: improved Intelligent Clip Limiting prevents loudspeaker damage while maintaining audio quality and punch under clipping conditions.

QuantaPulse™ Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.


Deprecated: Function get_woocommerce_term_meta is deprecated since version 3.6! Use get_term_meta instead. in /home/izo22auzu03q/public_html/wp-includes/functions.php on line 6031
Wishlist

Warning: call_user_func_array() expects parameter 1 to be a valid callback, no array or string given in /home/izo22auzu03q/public_html/wp-includes/class-wp-hook.php on line 326


Description

Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 3025 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 1600 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 820 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
6050 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
3200 W

Output circuitry
Class H

Frequency response
20 – 20000 Hz

Total Harmonic Distortion (THD)
< 0.05 %

Signal-to-noise ratio
113 dB

Damping factor
> 500

Crosstalk
> 80 dB

Gain
26 – 38 dB

Input sensitivity
4.0 / 2.0 / 1.0 V

Input impedance
(balanced) 20 k Ohm(s) , (unbalanced) 10 k Ohm(s)

Protection circuits
DC voltage , high frequency , on/off transients , open outputs and speaker load mismatching , power on muting , short circuit , Soft start , thermal overload

Controls
2 x volume , dual/bridge switch , Power

Indicators
Clipping , fault , ready , signal , temperature

Line inputs
2

Line input connectors
XLR

Line outputs
2

Line output connectors
XLR

Loudspeaker outputs
2

Speaker output connections
Speakon

Cooling
fan

Operating voltage
230 V

Power consumption @ full load
7 A

Width
483 mm

Height
89 mm

Depth
460 mm

Weight
10 kg

Reviews

There are no reviews yet.

Be the first to review “Ram Audio W 6000”

Your email address will not be published. Required fields are marked *